Skip to content

Site, Safety & Custom

Safety & PPE

PPE is a regulated product, not a generic one. A glove, a helmet or a harness is placed on the market under a specific standard, and in most markets it must carry the corresponding marking and be supported by a test report for that exact model. Buying PPE the way you buy consumables is how organisations end up with equipment that is comfortable, unregulated, and not legally usable.

The certification question has a second layer that buyers miss: models change. A factory may hold a valid certificate for a glove, then change the liner or the coating and keep selling it under the same name. The certificate covers the tested article. We ask for the certificate and read the model designation against the product being quoted, rather than accepting the existence of a certificate as coverage.

China supplies a large share of the world's PPE, with glove production concentrated in Shandong and Jiangsu, and footwear and protective clothing across Zhejiang, Fujian and Guangdong. The export-oriented factories are used to European and North American standards, and the difference between them and domestic-market producers is documentation, not necessarily capability.

Category at a glance

Safety & PPE

Product types mapped
6
Dedicated sub-pages
1
Reply commitment
1 business day

We supply to your specification. We do not manufacture this category and we do not inspect goods — how quality risk is handled is set out separately.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Coverage

What this family covers

Everything below is supplied, whether or not it has its own page. Linked items have a dedicated page with their own specification detail.

Safety GlovesCut, heat and chemical resistant hand protection.
Safety HelmetsIndustrial helmets with accessory slots.
Protective ClothingHi-vis, flame-retardant and chemical suits.
Safety FootwearSteel toe, anti-static and penetration resistant.
Eye ProtectionSpectacles, goggles and face shields.
Workplace Safety EquipmentSignage, barriers, harnesses and first aid.

Not listed? The category boundary is a sourcing convenience, not a limit. Describe the item and we will tell you whether it fits.

Specification

What to write down before you ask for an offer

These are the fields that move a safety & ppe quotation. You do not need all of them to start an inquiry — but each one you leave out comes back as an assumption, and the assumption will be the factory's, not yours.

Send these details
  1. 01

    Standard and level

    EN 388 (cut level A-F), EN 166, EN 361 for harnesses, ANSI Z87.1, with the performance level stated.

  2. 02

    Certification and marking

    Which body issued the certificate, the PPE category, and whether the marking may be applied.

  3. 03

    Size distribution

    The size range and the ratio per size, since an order of "10,000 pairs" can still leave the wrong sizes on the shelf.

  4. 04

    Hazard profile

    Cut, heat, chemical, arc flash or impact, with the specific exposure rather than a general description.

  5. 05

    Material and comfort

    Liner, coating, weight per pair, and whether the product must be latex-free or food-safe.

  6. 06

    Shelf life and storage

    For helmets, harnesses and respiratory protection, the manufacture date and service life matter more than the delivery date.

  7. 07

    Traceability

    Batch coding, manufacture date marking, and whether the factory will apply your lot numbers.

  8. 08

    Packaging

    Polybag, box, dispenser, and the labelling language required for the destination market.

Where it goes wrong

What actually causes problems in this category

Specific to safety & ppe, not generic advice. Each of these is something we ask about before a factory is approached.

The certificate covers the model, not the factory

A factory with a valid certificate for one glove model can be quoting a different model that was never tested. We ask for the certificate and check the model designation against what is being offered. When the two do not match, we say so — it is the buyer who bears the consequence of unmarked PPE at an inspection.

Cut levels are a range, not a promise

EN 388 cut resistance is reported as a level derived from a test on a sample of the article, and performance varies within a production lot. A "level D" glove is not a guarantee that nothing will cut through it; it is a test result. For high-consequence applications, the standard and the level should be treated as a floor and the engineering control as the actual protection.

Shelf life is a purchasing variable

Helmets, harnesses and respiratory filters have a service life measured from the manufacture date, not the purchase date. Stock received with a manufacture date eight months old has already used a third of a two-year life. We ask for the manufacture date to be stated on the packing list, because "fresh stock" is not something a buyer can verify after delivery.

Size distribution decides whether the PPE is worn

PPE that does not fit is PPE that gets removed. A uniform size split across a workforce produces shortages at the extremes and surplus in the middle. We ask for the actual size distribution rather than an even split, and for glove and footwear ranges to be confirmed against the sizing system used in the destination market, which is not always the same numbering.

Common questions

Safety & PPE — asked often

Answers include what we cannot do, where that is the honest answer.

Can you supply PPE certified for the EU or North America?

Where the factory holds certification for the exact model, yes, and we will show you what the certificate covers. We are not a certification body and we do not test products. For EU category III PPE, the notified body involvement is a legal requirement, and if a factory cannot document it we will tell you rather than working around it.

Do you supply OEM-branded PPE?

Yes, subject to volume and to the certification position. Branding on PPE is tightly controlled: where the product is certified, the certificate and the technical file usually have to be in the brand owner's name, and the notified body must be involved. That makes OEM PPE a longer project than OEM workwear, and the timeline should be planned accordingly.

What is the typical minimum order for PPE?

Stock models are often available in single-carton quantities; custom-branded or custom-coloured products carry factory minimums per size, which can be significant because the minimum applies to each size in the range. We state minimums per size rather than per style, since the per-style figure is the one that misleads.

How do you handle counterfeit certification marks?

We ask for the certificate, check the issuing body and the model coverage, and where the risk is material we recommend verifying the certificate with the issuer. We do not authenticate documents ourselves. If a certificate cannot be verified with its issuer, we treat that as a finding rather than an inconvenience.

Safety & PPE from China, priced and shipped

Send the specification, a drawing, or a photograph of the part you are replacing. A named person replies within one business day — with what we can confirm and what we still need from you.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.