Skip to content

Safety & PPE

Safety Gloves

Cut-resistant, heat-resistant, chemical-resistant and general-handling gloves, in HPPE, glass fibre, nitrile, latex, polyurethane and leather constructions. The range is defined by the hazard rather than by the material, and the same visual glove can be a level A cut glove or a level F one depending on the liner.

For buying purposes, three fields decide whether a glove is usable: the standard and level, the coating and its grip behaviour in the actual conditions, and the size range. A glove that performs well dry can be dangerous in oil, and a glove bought in one size will be removed by half the workforce.

Cut, heat and chemical resistant hand protection.

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Safety Gloves has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Standard and cut level

    EN 388 with the four-digit performance code, or ANSI/ISEA 105 cut level A1-A9.

  2. 02

    Coating

    PU, nitrile, latex or PVC, with the grip condition (dry, oily, wet) it is intended for.

  3. 03

    Liner and gauge

    HPPE, glass fibre, steel or basalt, and the gauge which affects dexterity.

  4. 04

    Size range

    Sizes offered and the ratio per size in the order.

  5. 05

    Certification

    EU type-examination certificate number, or ANSI test report, covering the model.

Common questions

Safety Gloves — asked often

For the wider category context, see Safety & PPE.

What do the four numbers in EN 388 mean?

They report abrasion, cut, tear and puncture performance in that order, each as a level. A newer revision adds a fifth position for impact and uses A-F letters for cut when the ISO 13997 method is used. The cut result from the two methods is not directly comparable, so a quotation should state which method and which scale it refers to.

Why do cut-resistant gloves fail in oily conditions?

Because grip, not cut resistance, becomes the limiting factor: a glove that slips on an oily surface encourages the wearer to grip harder and exposes the hand differently. Nitrile or sandy nitrile coatings are usually chosen for oily work for that reason. The hazard description should include the condition, not just the material being handled.

Safety Gloves to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.