Skip to content

Mechanical Components & Transmission

Gears

Spur, helical, bevel, worm and internal gears, cut or ground to drawing, in carbon steel, alloy steel, stainless or plastic. Chinese gear shops range from jobbing workshops with manual hobbing machines to production lines with CNC grinding and in-house heat treatment, and the difference shows in quality grade and repeatability rather than in the quotation sheet.

Gears are the part of a machine where a drawing error is most damaging. Because they are made to order, a wrong helix angle or an assumed profile shift is not discovered until the parts arrive and do not mesh. We push for a complete drawing set and, where it exists, the mating gear as a reference.

Spur, helical, bevel and worm gears to drawing.

Other types in this category

  • 15 product familiesone purchase order
  • Exported from NingboEXW / FOB / CIF / DDP
  • One specification sheetquoted line by line
  • Reply in 1 business dayfrom a named person
Start your sourcing project →

Specification

What to write down before you ask for an offer

Gears has its own set of fields — these are the ones that decide whether a quotation is comparable.

Send these details
  1. 01

    Module and tooth count

    Plus pressure angle, helix angle and hand for helical gears.

  2. 02

    Quality grade

    ISO 1328 grade, which drives the cutting or grinding process.

  3. 03

    Material and heat treatment

    Case depth, core hardness and whether grinding after heat treatment is required.

  4. 04

    Profile and lead modification

    Profile shift, tip relief and lead correction, if the design uses them.

  5. 05

    Inspection data

    Which measurements the factory will report, and with what instrument.

Common questions

Gears — asked often

For the wider category context, see Mechanical Components & Transmission.

What information does a gear factory need to quote?

Module, tooth count, pressure angle, helix angle, face width, bore and keyway, material and heat treatment, quality grade, and the mating gear data. A drawing that carries all of these can be quoted in a day. One that carries only the outside diameter will produce a quotation with assumptions buried in it.

Can gears be supplied as a set with the mating part?

Yes, and for replacement work a matched set is usually the safer purchase, because the existing mate has already worn into a particular contact pattern. We can quote single gears or pairs, and we ask the factory to confirm the centre distance and backlash for the pair rather than for each gear separately.

Gears to a written specification, delivered

Send the size, material or rating you need, plus a quantity. If you have an existing part number or a supplier quotation to compare against, include it — that is usually the fastest way to a usable answer.

We reply within 1 business day — from a named person, not an auto-responder. Your requirement is confirmed first; the quotation follows once details are agreed.